Connection method | Appearance | Sensing distance |
Output | Operation mode |
Model | |
Pre-wired Models (2m) | Shielded |
M8 | 2 mm | DC 2-Wire (polarity) |
NO | E2EF-X2D1 2M |
M12 | 3 mm | E2EF-X3D1 2M | ||||
M18 | 7 mm | E2EF-X7D1 2M | ||||
M30 | 12 mm | E2EF-X12D1 2M | ||||
Pre-wired Smartclick Connector Models (M12) |
Shielded |
M8 | 2 mm | E2EF-X2D1-M1TGJ 0.3M | ||
M12 | 3 mm | E2EF-X3D1-M1TGJ 0.3M | ||||
M18 | 7 mm | E2EF-X7D1-M1TGJ 0.3M | ||||
M30 | 12 mm | E2EF-X12D1-M1TGJ 0.3M |
Connection method | Appearance | Sensing distance |
Output | Operation mode |
Model | |
Pre-wired Models (2m) | Shielded |
M8 | 2 mm | DC 2-Wire (polarity) |
NO | E2EF-QX2D1 2M |
M12 | 3 mm | E2EF-QX3D1 2M | ||||
M18 | 7 mm | E2EF-QX7D1 2M | ||||
M30 | 12 mm | E2EF-QX12D1 2M | ||||
Pre-wired Smartclick Connector Models (M12) |
Shielded |
M8 | 2 mm | E2EF-QX2D1-M1TGJ 0.3M | ||
M12 | 3 mm | E2EF-QX3D1-M1TGJ 0.3M | ||||
M18 | 7 mm | E2EF-QX7D1-M1TGJ 0.3M | ||||
M30 | 12 mm | E2EF-QX12D1-M1TGJ 0.3M |
Cable connection direction |
Cable specifications |
Cable length |
No. of cable conductors |
Model | Applicable Proximity Sensor model number |
Straight |
Flame-retardant, flexible cable |
2 m | 4 | XS5F-D421-D80-F | E2EF-X[]D1-M1TGJ E2EF-QX[]D1-M1TGJ |
5 m | 4 | XS5F-D421-G80-F | |||
Size | M8 | M12 | |||
Shielded | Shielded | ||||
Exterior | Completely stainless- steel housing |
Fluororesin coating |
Completely stainless- steel housing |
Fluororesin coating |
|
Model | E2EF-X2D1 (-M1TGJ) |
E2EF-QX2D1 (-M1TGJ) |
E2EF-X3D1 (-M1TGJ) |
E2EF-QX3D1 (-M1TGJ) |
|
Sensing distance | 2mm ± 10% | 3mm ± 10% | |||
Set distance | 0 to 1.4 mm | 0 to 2.1mm | |||
Differential travel | 15% max. of sensing distance | ||||
Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) |
||||
Standard sensing object | Iron, 12 × 12 × 1 mm | Iron, 12 × 12 × 1 mm | |||
Response frequency *1 | 200Hz | 80Hz | |||
Power supply voltage | 10 to 30 VDC, ripple (p-p): 10% max. | ||||
Leakage current | 0.8 mA max. | ||||
Output configuration | With polarity | ||||
Control output |
Switching capacity | 3 to 100 mA | |||
Residual voltage | 3 V max.(Load current: 100 mA max., Cable length: 2 m) | ||||
Indicators | Operation indicator (red LED), Setting indicator (green LED) | ||||
Operation mode (with sensing object approaching) |
NO (normally open) | ||||
Protection circuits | Surge suppressor, Load short-circuit protection | ||||
Ambient temperature range | Operating: − 10 to 70 °C, Storage: − 25 to 70 °C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ± 20% max. of sensing distance at 23 °C in the temperature range of − 10 to 70 °C. | ||||
Voltage influence | ± 1% max. of sensing distance at rated voltage in the rated voltage ± 15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
||||
Shock resistance | Destruction: 500 m/s2 10 times each in X, Y, and Z directions |
Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions |
|||
Degree of protection | IEC 60529 IP67 | ||||
Connection method | Unmarked: Pre-wired Models (Standard cable length: 2 m) Models ending with -M1TGJ: Pre-wired Connector Models (Standard cable length: 300 mm) |
||||
Weight (packed state) |
Pre-wired Models (2 m) |
Approx. 105 g | Approx. 190 g | ||
Pre-wired Connector Models |
Approx. 65 g | Approx. 85 g | |||
Materials | Case | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | |||
Sensing surface | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
(thickness) | 0.2mm | 0.4mm | |||
Clamping nuts | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
Toothed washer | Zinc-plated iron | ||||
Cable | PVC (flame retardant) | ||||
Accessories | Instruction manual | ||||
Size | M18 | M30 | |||
Shielded | Shielded | ||||
Exterior | Completely stainless- steel housing |
Fluororesin coating |
Completely stainless- steel housing |
Fluororesin coating |
|
Model | E2EF-X7D1 (-M1TGJ) |
E2EF-QX7D1 (-M1TGJ) |
E2EF-X12D1 (-M1TGJ) |
E2EF-QX12D1 (-M1TGJ) |
|
Sensing distance | 7mm ± 10% | 12mm ± 10% | |||
Set distance | 0 to 4.9mm | 0 to 8.4mm | |||
Differential travel | 15% max. of sensing distance | ||||
Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on Data Sheet.) |
||||
Standard sensing object | Iron, 30 × 30 × 1 mm | Iron, 54 × 54 × 1 mm | |||
Response frequency *1 | 100Hz | 50Hz | |||
Power supply voltage | 10 to 30 VDC, ripple (p-p): 10% max. | ||||
Leakage current | 0.8 mA max. | ||||
Output configuration | With polarity | ||||
Control output |
Switching capacity | 3 to 100 mA | |||
Residual voltage | 3 V max.(Load current: 100 mA max., Cable length: 2 m) | ||||
Indicators | Operation indicator (red LED), Setting indicator (green LED) | ||||
Operation mode (with sensing object approaching) |
NO (normally open) | ||||
Protection circuits | Surge suppressor, Load short-circuit protection | ||||
Ambient temperature range | Operating: − 10 to 70 °C, Storage: − 25 to 70 °C (with no icing or condensation) | ||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||||
Temperature influence | ± 20% max. of sensing distance at 23 °C in the temperature range of − 10 to 70 °C. | ||||
Voltage influence | ± 1% max. of sensing distance at rated voltage in the rated voltage ± 15% range | ||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | ||||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
||||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | ||||
Degree of protection | IEC 60529 IP67 | ||||
Connection method | Unmarked: Pre-wired Models (Standard cable length: 2 m) Models ending with -M1TGJ: Pre-wired Connector Models (Standard cable length: 300 mm) |
||||
Weight (packed state) |
Pre-wired Models (2 m) |
Approx. 215 g | Approx. 295 g | ||
Pre-wired Connector Models |
Approx. 110 g | Approx. 190 g | |||
Materials | Case | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | |||
Sensing surface | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
(thickness) | 0.4mm | 0.5mm | |||
Clamping nuts | Stainless steel (SUS303) (E2EF-QX[]: Fluororesin coating) | ||||
Toothed washer | Zinc-plated iron | ||||
Cable | PVC (flame retardant) | ||||
Accessories | Instruction manual |