Type | Appearance (mm) * |
Sensing distance (mm) | Standard object |
Min. bending radius (mm) |
Features | Model |
Limited- reflective |
(Free-cut) |
8 to 20 mm from the lens tip (recommended sensing distance: 11 mm) 19 to 31 mm from the center of mounting hole A (recommended sensing distance: 22 mm) (See the dimension drawings.) |
Glass (t = 0.7 mm) |
R40 | Materials: Heat-resistant PVC and fluororesin IP67 at 60°C |
E32-L11FP 2M |
E32-L11FP 5M | ||||||
(Free-cut) |
8 to 20 mm from the lens tip (recommended sensing distance: 11 mm) 32 to 44 mm from the center of mounting hole A (recommended sensing distance: 35 mm) (See the dimension drawings.) |
Materials: SUS316L and fluororesin IP67 at 85°C |
E32-L11FS 2M | |||
E32-L11FS 5M | ||||||
Materials: SUS316L and fluororesin IP67 at 70°C |
E32-L12FS 2M | |||||
E32-L12FS 5M |
Appearance | Connection method |
Functions | Model | |||
NPN output | PNP output | |||||
Pre-wired model (2 m) |
Tough Mode Super Tough Mode ON-delay and OFF-delay timer |
E3X-DA11TG-S 2M | E3X-DA41TG-S 2M | |||
Model | E3X-DA11TG-S | E3X-DA41TG-S | ||||
Output | NPN open-collector output | PNP open-collector output | ||||
Power supply voltage | 12 to 24 VDC ±10%, ripple (p-p) 10% max. | |||||
Power consumption | 960 mW max. (current consumption: 40 mA max. at power supply voltage of 24 VDC) | |||||
Control output | Load power supply voltage: 26.4 VDC, load current: 50 mA max.; residual voltage: 1 V max. |
|||||
Response time | Tough Mode (TG): Operate/reset in 16 ms each, Super Tough Mode (STG): Operate/reset in 64 ms each Standard Mode (STND): Operate/reset in 1 ms each, High-resolution Mode (HRES) Operate/reset in 4 ms each |
|||||
Timer function | ON-delay/OFF-delay timer, OFF-delay timer, ON-delay timer, one-shot timer |