Sensing method |
Sensing distance | Output configuration | Model | |
Through-beam | 500 mm | NPN open collector NO (normally open) |
E4E2-TS50C1 2M | |
NPN open collector NC (normally closed) |
E4E2-TS50C2 2M | |||
Model | E4E2-TS50C[] | |||
Sensing distance | 500 mm | |||
Standard sensing object | 40 × 40 × 2 mm SPCC plate | |||
Response frequency | 20 Hz max. | |||
Power supply voltage (operating voltage range) |
24 VDC (21.6 to 26.4 V) with a max. ripple (p-p) 10% | |||
Current consumption | E4E2-TS50TC1 Emitter: 25 mA max. at 24 VDC | |||
E4E2-TS50RC1 Receiver: 15 mA max. at 24 VDC | ||||
Control output | NPN open collector, Load voltage: 26.4 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max.) |
|||
Indicators | Emitter: Power indicator (red) | |||
Receiver: Operation indicator (red), Stability indicator (green) | ||||
Ambient temperature | Operating: 0 to 50°C, Storage: -10 to 55°C (with no icing or condensation) | |||
Ambient humidity | Operating and storage: 35% to 85% (with no condensation) | |||
Insulation resistance | 100 MΩ min. (at 500 VDC) between current-carrying parts and case | |||
Dielectric strength | 1,500 VAC (50/60 Hz) for 1 min between current-carrying parts and case | |||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions |
|||
Shock resistance | Destruction: 500 m/s2 three times each in X, Y, and Z directions | |||
Degree of protection | IP64 (IEC) | |||
Connection method | Pre-wired (Standard cable length: 2 m) | |||
Weight (packed state) | Approx. 160 g (Emitter and Receiver) | |||
Materials | Case: ABS resin, Oscillator surface: Epoxy resin | |||
Accessories | Mounting Bracket (with screws), adjustment screwdriver, instruction sheet |