Omron Proximity Sensors. Cylindrical. E2EQ-[]-IL[]

IO-Link Proximity Sensor (Spatter-resistant Models)
E2EQ-[]-IL[]

IO-Link Makes Sensor Level Information Visible and Solves the Three Major Issues at Manufacturing Sites! A Proximity Sensor That Can Be Used in a Spatter Environment.

DC 3-wire IO-Link Models

Appearance Sensing
distance
Connection
method
Pin
arrangement
IO-Link
baud rate
Model
Shielded
3544_lu_1_1
M12 3 mm Pre-wired Models
(2 m)
-- COM2 (38.4 kbps) E2EQ-X3B4-IL2 2M
COM3 (230.4 kbps) E2EQ-X3B4-IL3 2M
M12 Pre-wired
Smartclick Connector
Models (0.3 m)
1: +V
3: 0 V
4: C/Q output
COM2 (38.4 kbps) E2EQ-X3B4-M1TJ-IL2 0.3M
COM3 (230.4 kbps) E2EQ-X3B4-M1TJ-IL3 0.3M
M18 7 mm Pre-wired Models
(2 m)
-- COM2 (38.4 kbps) E2EQ-X7B4-IL2 2M
COM3 (230.4 kbps) E2EQ-X7B4-IL3 2M
M12 Pre-wired
Smartclick Connector
Models (0.3 m)
1: +V
3: 0 V
4: C/Q output
COM2 (38.4 kbps) E2EQ-X7B4-M1TJ-IL2 0.3M
COM3 (230.4 kbps) E2EQ-X7B4-M1TJ-IL3 0.3M
M30 10 mm Pre-wired Models
(2 m)
-- COM2 (38.4 kbps) E2EQ-X10B4-IL2 2M
COM3 (230.4 kbps) E2EQ-X10B4-IL3 2M
M12 Pre-wired
Smartclick Connector
Models (0.3 m)
1: +V
3: 0 V
4: C/Q output
COM2 (38.4 kbps) E2EQ-X10B4-M1TJ-IL2 0.3M
COM3 (230.4 kbps) E2EQ-X10B4-M1TJ-IL3 0.3M
Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).

Accessories (Sold Separately)

Sensor I/O Connectors

(Models with Pre-wired Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Type Appearance Cable length Sensor I/O Connector
model number
Applicable Proximity Sensor
model number
Socket on one
cable end
Straight
3544_lu_2_1
2 m XS5F-D421-D80-F E2E-X[]B4-M1TJ-IL[]
5 m XS5F-D421-G80-F
L-shape
3544_lu_2_2
2 m XS5F-D422-D80-F
5 m XS5F-D422-G80-F
Socket and plug
on cable ends *
Straight/straight
3544_lu_2_3
2 m XS5W-D421-D81-F
5 m XS5W-D421-G81-F
L-shape/L-shape
3544_lu_2_4
2 m XS5W-D422-D81-F
5 m XS5W-D422-G81-F
Note: Refer to Sensor I/O Connector/Sensor Controller for details.
* There are also straight type/L-shape type combinations available.

DC 3-wire IO-Link Models

Item Size M12 M18 M30
Shielded Shielded
Model E2EQ-X3B4-IL[] E2EQ-X7B4-IL[] E2EQ-X10B4-IL[]
Sensing distance 3 mm ±10% 7 mm ±10% 10 mm ±10%
Set distance *1 0 to 2.4 mm 0 to 5.6 mm 0 to 8 mm
Differential travel 10% max. of sensing distance
Detectable object Ferrous metal
(The sensing distance decreases with non-ferrous metal. Refer to Engineering Data
on Catalog.)
Standard sensing object Iron, 12 × 12 × 1 mm Iron, 18 × 18 × 1 mm Iron, 30 × 30 × 1 mm
Response frequency *2 1 kHz 0.5 kHz 0.4 kHz
Power supply voltage 10 to 30 VDC (including 10% ripple (p-p))
Current consumption 20 mA max.
Control output Load current 100 mA max.
Residual voltage 2 V max. (Load current: 100 mA, Cable length: 2 m)
Indicators *1 In the Standard I/O mode (SIO mode): Operation indicator (orange, lit) and stability
indicator (green, lit)
In the IO-Link mode: Operation indicator (orange, lit) and communication indicator
(green, blinking at 1 s intervals)
Operation mode PNP NO/NC switching type (Factory setting: NO)
Refer to the timing charts under I/O Circuit Diagrams on Catalog for details.
Protection circuits Power supply reverse polarity protection, output reverse polarity protection, surge
suppressor, and output short-circuit protection
Ambient temperature range Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range Operating/Storage: 35% to 95% (with no condensation)
Temperature influence ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance 50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z
directions
Shock resistance Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection IEC 60529 IP67, in-house standards: oil-resistant
Connection method Pre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
(Standard cable length: 0.3 m)
Materials Case Fluororesin coating (Base material: brass)
Sensing surface Fluororesin
Clamping nuts Fluororesin coating (Base material: brass)
Toothed washer Zinc-plated iron
Main IO-Link functions Operation mode switching between NO and NC, self diagnosis enabling, excessive
proximity judgment distance selecting, timer function of the control output and
timer time selecting, instability output (IO-Link mode) ON delay timer time selecting
function, monitor output, operating hours read-out, and initial reset
Communication
specifications
IO-Link
specification
Ver 1.1
Baud rate -IL3: COM3 (230.4 kbps), -IL2: COM2 (38.4 kbps)
Data length PD size: 2 bytes, OD size: 1 byte (M-sequence type: TYPE_2_2)
Minimum cycle
time
-IL3 (COM3): 1 ms, -IL2 (COM2): 2.3 ms
Accessories Instruction manual
Note: Please contact your OMRON sales representative regarding the IO-Link setup file (IODD file).
*1. In the Standard I/O mode (SIO mode), use the product in a range that the green stability indication lamp is lit. (Although the lamp is turned off when the object detected has approached excessively, the detection performance is stable.)
In the IO-Link mode, use the product in a range that the Byte1_bit4 for instability detection is zero. (Although the Byte1_bit5 for excessive proximity detection is one if the object detected has approached excessively, the detection performance is stable.)
Please contact your OMRON sales representative regarding assignment of data.
*2. The response frequency is an average value. Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

Pre-wired Models

E2EQ-X3B4-IL[]

E2EQ-[]-IL[] Dimensions 2
*1. 4-dia. vinyl-insulated round cable with 3 conductors
(Flame-resistant, Conductor cross section: 0.3 mm2, Insulator diameter: 1.3 mm), Standard length: 2 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X7B4-IL[]

E2EQ-[]-IL[] Dimensions 3
*1. 6-dia. vinyl-insulated round cable with 3 conductors
(Flame-resistant, Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X10B4-IL[]

E2EQ-[]-IL[] Dimensions 4
*1. 6-dia. vinyl-insulated round cable with 3 conductors
(Flame-resistant, Conductor cross section: 0.5 mm2, Insulator diameter: 1.9 mm), Standard length: 2 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

Pre-wired Connector Models

E2EQ-X3B4-M1TJ-IL[]

E2EQ-[]-IL[] Dimensions 6
*1. 4-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X7B4-M1TJ-IL[]

E2EQ-[]-IL[] Dimensions 7
*1. 6-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

E2EQ-X10B4-M1TJ-IL[]

E2EQ-[]-IL[] Dimensions 8
*1. 6-dia. vinyl-insulated round cable (Flame-resistant), Standard length: 0.3 m
*2. Operation indicator (orange), stability indicator/communication indicator (green)

Mounting Hole Dimensions

E2EQ-[]-IL[] Dimensions 9