Omron relays. Terminal Relays.

OMRON's Terminal Relay Series contributes to saving space in control panels. They are ideal for output interfaces.

Terminal SSRG3S4

Compact Terminal SSR with 4 Outputs

G3S4

Terminal SSR

Compact Terminal SSR with 4 Outputs

Contact configuration	Heat sink	Built-in SSRs	Zero cross function	Applicable output load	Model	Rated voltage
Four SPST-NO relays	Yes	G3S-201PL-PD	No	1 A at 75 to 264 VAC *1	G3S4-A	5 VDC
						12 VDC
						24 VDC
	No			0.6 A at 75 to 264 VAC *1	G3S4-A1	5 VDC
						12 VDC
						24 VDC
	Yes	G3SD-Z01P-PD		1 A at 3 to 26 VDC *2	G3S4-D	5 VDC
						12 VDC
						24 VDC
	No			0.6 A at 3 to 26 VDC *2	G3S4-D1	5 VDC
						12 VDC
						24 VDC

*1. Given as "250 VAC" on the G3S4.
*2. Given as "24 VDC" on the G3S4.

Model	Rated voltage
P6BF-4BND	5 VDC
	12 VDC
	24 VDC

Model

Y92B-S10

Model	Rated voltage
G3S-201PL-PD	5 VDC
	12 VDC
	24 VDC
G3SD-Z01P-PD	5 VDC
	12 VDC
	24 VDC

Applicable Terminal Relays	Model
G6B-4CB G6B-4[][]ND G3S4	P6B-Y1

(A Short Bar is used to wire crossovers for common terminals for coils or contacts.)

Applicable Terminal Relays	Model
G6B-4CB G6B-4[][]ND G3S4	G6B-4-SB

Applicable Terminal Relays	Model
G6B-4BND G6B-47BND G6B-48BND G3S4-A1 G3S4-D1	G6B-4-C

Rated voltage		Operating voltage	Must operate level	Must release voltage level	Input impedance		Rated current
					G3S4-A, G3S4-A1	G3S4-D, G3S4-D1	G3S4-A, G3S4-A1	G3S4-D, G3S4-D1
DC	5 V	4 to 6 VDC	4 VDC max.	1 VDC min.	440 Ω ±20%	550 Ω ±20%	19.2 mA±20%	15.8 mA±20%
	12 V	9.6 to 14.4 VDC	9.6 VDC max.		1 kΩ ±20%	1.2 kΩ ±20%	15.8 mA±20%	12.5 mA±20%
	24 V	19.2 to 28.8 VDC	19.2 VDC max.		2.1 kΩ ±20%	2.3 kΩ ±20%	15.7 mA±20%	13.2 mA±20%

Note: The rated current includes the terminal's LED current.

Model Applicable load	Load voltage	Load current	Inrush current resistance
G3S4-A	75 to 264 VAC	0.1 to 1 A	15 A (60 Hz, 1 cycle)
G3S4-A1		0.1 to 0.6 A
G3S4-D	3 to 26 VDC	0.01 to 1 A	3 A (10 ms)
G3S4-D1		0.01 to 0.6 A

Model	G3S4-A, G3S4-A1	G3S4-D, G3S4-D1
Must operate time	1 ms max.
Release time	0.5 × load power cycle + 1 ms max.	1 ms max.
Output ON voltage drop	1.6 V max. (RMS)	1.5 V max.
Leakage current	2 mA max.	0.1 mA max. (at 26 VDC)
Insulation resistance	100 MΩ min. (at 500 VDC)
Dielectric strength	2,000 VAC, 50/60 Hz for 1 min
Vibration resistance	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance	1,000 m/s2
Storage temperature	- 30 to 100 ° C (with no icing)
Ambient operating temperature	- 30 to 80 ° C (with no icing)
Ambient operating humidity	45% to 85%
Weight	Approx. 95 g (-A model)	Approx. 95 g (-D model)

G3S4-A
G3S4-D
G3S4-A1
G3S4-D1
P6BF-4BND (with operation indicator)

Mounting Holes (Top View)

Terminal Arrangement/Internal Connections (Top View)

Note: Make sure that the polarity of the input terminal is correct.
The polarity given inside parentheses ( ) is for G3S4-D and G3S4-D1 Relays. There is no indication of polarity
when Connection Sockets are used alone.

Y92B-S10

G3S-201PL-PD
G3SD-Z01P-PD

Note: 1. The polarity given inside parentheses ( ) is for DC loads.
2. The load can be connected to ether the positive or negative SSR output terminal.