Model
|
GP2601-TC11
|
Type
|
TFT Color LCD
|
Display Colors
|
256 colors (no blink)/ 64 colors (3-speed blink) (software control)*1
|
Backlight
|
CCFL (Service life: 50,000 hrs. at 24hr. operation)
|
Resolution
|
800 ? 600 pixcels
|
Effective Display Area (mm)
|
246.0(W) ? 184.5(H)
|
Brightness Control
|
4 levels of adjustment available via touch panel
|
Contrast Adjustment
|
-
|
Language Character Sets
|
ASCII: (Code page 850) Alphanumeric (incl. European characters) Chinese: (GB2312-80 codes) simplified Chinese fonts Japanese: ANK 158, Kanji : 6962 (JIS Standards 1 & 2) Korean: (KSC5601 - 1992 codes) Hangul fonts Taiwanese: (Big 5 codes) traditional Chinese fonts
|
Text
|
8 ? 8 dots
|
100 char. ? 75 rows
|
8 ? 16 dots
|
100 char. ? 37 rows
|
16 ? 16 dots
|
50 char. ? 37 rows
|
32 ? 32 dots
|
25 char. ? 18 rows
|
Character Sizes*2
|
8 ? 8 dots, 8 ? 16 dots, 16 ? 16 dots, 32 ? 32 dots
|
Font Sizes
|
Width can be expanded 1 to 8 times. Height can be expanded 1/2*3, 1 to 8 times.
|
Application Memory
|
4MB FLASH EPROM
|
Data Backup Memory
|
128KB - uses lithium battery*4
|
Touch Panel Resolution
|
40 ? 30 keys/ screen - 1 or 2 point touch
|
External Interfaces
|
Serial Interface
|
Asynchronous Transmission: RS232C/ RS422 Data Length: 7 or 8 bits Stop Bit: 1 or 2 bits Parity: None, Odd or Even Data Transmission Speed: 2400bps to 115.2kbps, 187.5Kbps*5
|
CF Card Interface
|
1 slot
|
AUX Input/Output *6
|
Remote Reset Input
|
Remote Reset Input: 1 point, Input Voltage: DC24V ±10%, Input Current: 4mA (TYP), Min. Input Pulse Width: 2ms Operating Voltage: (When ON) Min. DC21.1V/ (When OFF) Max. DC3V Isolation Method: Photocoupler Isolation
|
Output
|
?Output: 3 Points (RUN Output: 1 point, System Alarm Output: 1 point, External Buzzer Output: 1 point) Rated Voltage: DC24V, Max. Rated Current: 50mA/ point, Wire Gauge: AWG28 to AWG16
|
Printer Interface
|
Compatible with NECPC-PR201/PL, EPSON ESC/P24-J84(C), HP Laser Jet, PCL 4 command, EPSON PM/Stylus (6-color ink), EPSON Stylus (4-color ink) compatible printers*7
|
Tool Connector
|
Asynchronous TTL level nonprocedure command I/F Used for transferring data between the GP application software and the GP. Used for data transfer with the 2-Port feature. Used for a variety of devices, including a bar-code reader.
|