Appearance | Sensing distance | Output configuration/ Operation mode |
Model | |||
M18 | 4 mm | DC 3-wire, NPN NO |
E2EY-X4C1 2M | |||
M30 | 8 mm | E2EY-X8C1 2M | ||||
Model | E2EY-X4C1 | E2EY-X8C1 | ||||
Sensing distance | 4 mm ±10% | 8 mm ±10% | ||||
Set distance | 0 to 2.8 mm | 0 to 5.6 mm | ||||
Differential travel | 20% max. of sensing distance | |||||
Detectable object | Non-ferrous metal (Does not detect ferrous metal.) | |||||
Standard sensing object | Aluminum: 18 × 18 × 1 mm | Aluminum: 30 × 30 × 1 mm | ||||
Response frequency * | 70 Hz | |||||
Power supply voltage (operating voltage range) |
12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | |||||
Current consumption | 20 mA max. | |||||
Control output |
Load current |
NPN open-collector output, 100 mA max. (at 30 VDC) | ||||
Residual voltage |
2 V max. (Load current: 100 mA, Cable length: 2 m) | |||||
Indicators | Detection indicator (red) | |||||
Operation mode (with sensing object approaching) |
Load ON: NO (Refer to Datasheet.) | |||||
Protection circuits | Reverse polarity protection, Load short-circuit protection, Surge suppressor | |||||
Ambient temperature range | Operating/Storage: -10 to 55°C (with no icing or condensation) | |||||
Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | |||||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 55°C | |||||
Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±15% range | |||||
Insulation resistance | 50 MΩ min. (at 500 VDC) between current-carrying parts and case | |||||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | |||||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | |||||
Shock resistance | Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions | |||||
Degree of protection | IEC 60529 IP67, in-house standards: oil-resistant | |||||
Connection method | Pre-wired Models (Standard cable length: 2 m) | |||||
Weight (packed state) | Approx. 140 g | Approx. 190 g | ||||
Materials | Case | Nickel-plated brass | ||||
Sensing surface |
Heat-resistant ABS | |||||
Clamping nuts |
Nickel-plated brass | |||||
Toothed washer |
Zinc-plated iron | |||||
Accessories | --- |